Not registered? Then you're not seeing all there is to see. Do you want to contribute? Register now by clicking HERE!
 
  Forums  
 
Advertise with Classic Motorcycling Australia
Advertise with Classic Motorcycling Australia
 
 All Forums
 Eligibilty Area
 Eligibilty on Motorcycles
 Brake Caliper Offset Brackets		  New Topic  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  
  Current Topic Rating: Total Rating: 0 | Join the Forum to Rate this Topic at: Classic Motorcycling Australia Forums  

japo
Level 1 Member

New South Wales


2 Posts
Posted - 23 Sep 2009 :  11:34:53 AM  Show Profile Send japo a Private Message  
 
Does anyone envisage an issue using a simple custom made braket to allow a caliper to be used with an oversized disc brake rotor? (Specifically for P5) Assume that the rotor and caliper are otherwise allowable.

revhd
Level 2 Member

Victoria


108 Posts
Posted - 23 Sep 2009 :  1:34:21 PM  Show Profile Send revhd a Private Message  
 
no.many people do that it is a common modification
 
 
125 alliance
Go to Top of Page

OldKwak
Level 2 Member

Victoria


156 Posts
Posted - 23 Sep 2009 :  3:23:08 PM  Show Profile Send OldKwak a Private Message  
 
It's usually the only way to get after market calipers to match with the discs.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Topic Locked
 Printer Friendly
Jump To:
Classic Motorcycling Australia Forums © 2000 - 2024 Go To Top Of Page
This page was put together in 0.09 seconds. Snitz Forums 2000


 
 
 
Copyright © 2000 - 2024 by Classic Motorcycling Australia | Web design by: Greening Computer Services