Not registered? Then you're not seeing all there is to see. Do you want to contribute? Register now by clicking HERE!
 
  Forums  
 
Advertise with Classic Motorcycling Australia
Advertise with Classic Motorcycling Australia
 
 All Forums
 Eligibilty Area
 Eligibilty on Motorcycles
 Forgotten Era floating disks
 New Topic  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  
  Current Topic Rating: Total Rating: 0 | Join the Forum to Rate this Topic at: Classic Motorcycling Australia Forums  

mboddy
Level 2 Member

Australian Capital Territory


26 Posts

Posted - 26 Jan 2010 :  07:38:59 AM  Show Profile Send mboddy a Private Message  

 
Now that the Period 5 cutoff date is end 1982, what floating disks can we use?
As far as I am aware they still need to be maximum 300mm.

The Suzuki RG replicas are around $550 each:


These Brembos were at the island this week and searching the net shows they are ok:


What else?
Anything affordable?

john
Forum Moderator

Victoria


3130 Posts

Posted - 18 May 2010 :  09:38:02 AM  Show Profile Send john a Private Message  

 
Check directly with Ross martin at MA, it may be easier to get the facts rather than look at bikes at the track. Sometimes they are not kosher.
 

 
John Daley Sidecar #68
' there are those who do, those who dont do and those who undo. We must lampoon the latter."
Go to Top of Page

OldKwak
Level 2 Member

Victoria


156 Posts

Posted - 18 May 2010 :  10:26:21 AM  Show Profile Send OldKwak a Private Message  

 
What are you trying top say John, LOL
Go to Top of Page

john
Forum Moderator

Victoria


3130 Posts

Posted - 18 May 2010 :  11:51:13 AM  Show Profile Send john a Private Message  

 
I am saying that big expensive changes need proper research before installing them. It is unsafe to inspect existing machines and asume they are correctly log booked.
There have been examples of mistakes taht have been replicated only to then get pinged at scrutineering.
 

 
John Daley Sidecar #68
' there are those who do, those who dont do and those who undo. We must lampoon the latter."
Go to Top of Page

Bummers
Level 3 Member

Queensland


244 Posts

Posted - 18 May 2010 :  6:58:03 PM  Show Profile  Visit Bummers's Homepage Send Bummers a Private Message  

 
quote:
As far as I am aware they still need to be maximum 300mm.


304mm according to AP Racing re "Classic" Lockheed replicas - You must be logged in to see this link.
 

 
“Racing is life. Anything before or after is just waiting.” Steve McQueen
Go to Top of Page

OldKwak
Level 2 Member

Victoria


156 Posts

Posted - 20 May 2010 :  07:01:58 AM  Show Profile Send OldKwak a Private Message  

 
Lets face it John, the brakes issue in p5 has been a joke for ages and has been confused further with the recent change to the cutoff date. They should just bite the bullet and adopt the same approch as the CMRC in the UK. In fact that should be the basis of a sensible rule change.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Topic Locked
 Printer Friendly
Jump To:
Classic Motorcycling Australia Forums © 2000 - 2024 Go To Top Of Page
This page was put together in 0.12 seconds. Snitz Forums 2000


 
 
 
Copyright © 2000 - 2024 by Classic Motorcycling Australia | Web design by: Greening Computer Services